| Function | Feed Metal Strip |
|---|---|
| Parameters Of Workpiece | Width: 600~1500mm |
| Swing Distance | =1000mm |
| Mill Roll Capacity | ≤8T |
| Dimention | 2000mm×800mm×900mm (L×W×H) |
| Function | Edge Cutting Trimming Beading & Pressing For Metal Ware |
|---|---|
| Size Of Workpiece | ≤φ325mm×300mm (Dia.×H) |
| Thickness | ≤0.8mm |
| Motor (for The) Power | Workpiece Motor: 4kw×2 |
| Speed | Workpiece Speed: 28-140r/min (Adjustable) |
| Function | Feed And Coat With Oil For Metal Disc |
|---|---|
| Parameters Of Workpiece | ≤φ(180~500)mm×3mm (Dia.×T) |
| Motor (for The) Power | X-axle Servo Motor: 1.5kw×1 |
| Oiling Way | Coat |
| Workpiece Holding | Vacuum Adsorption |
| Function | Edge Grinding For Metal Ware |
|---|---|
| Size Of Workpiece | Dia.: φ200~620mm |
| Thickness | ≤1.5mm |
| Size Of Abrasive Wheel | ≤φ200mm×30mm (Dia.×H) |
| Total Electrical Power | 8.3KW |
| Function | Edge Trimming And Beading, Bottom Turning |
|---|---|
| Size Of Workpiece | ≤φ400mm×160mm (Dia.×H) |
| Motor (for The) Power | Workpiece Motor: 4kw×1 |
| Speed | Workpiece: 1950r/min |
| Workpiece Holding | Vacuum Adsorption |
| Slide Stroke (mm) | 400 |
|---|---|
| Return Force (kN) | 2000 KN |
| Machine Type | Hydraulic Press Machine |
| System | Servo |
| Voltage | 380V/220V Optional |
| Slide Stroke (mm) | 400 |
|---|---|
| Return Force (kN) | 2000 KN |
| Machine Type | Hydraulic Press Machine |
| System | Servo |
| Voltage | 380V/220V Optional |
| Function | Hole Punch For Metal Ware |
|---|---|
| Size Of Workpiece | Dia.: φ160~φ400mm |
| Max. Punching Thickness | Stainless Steel: ≤1.2mm |
| Max. Number Of Punching Holes | Left:10, Right: 10 |
| Hole Size | Dia.: φ4.2~φ8.2mm |
| Function | Oval, Triangle, Rectangle, Gourd And Other Shaped Metal Products Of The Edge - Cutting ,beading And Pressing |
|---|---|
| Max. Size Of Workpiece | Longest Edge 600mm × H 300mm |
| Control System | NC Control System |
| Machine Power | Total Power: About 10kw |
| Power Supply | Three-phase Five Line, 380V±10% 50Hz (According To Customer Requirements) |
| Function | Outer Polish For Pan (Bottom) |
|---|---|
| Stations | 4 |
| Size Of Workpiece | ≤φ120mm×120mm (Dia.×H) |
| Size Of Abrasive Wheel | ≤φ400mm (Dia.) |
| Motor Power | Abrasive Wheel Motor:7.5kw×1 |
