Rolling press machine (Wheel type) handmade sink machine
Rolling press machine (Wheel type)
1. Before weld
Roll pressing the bowl’s vertical seams into rounded corners.
2. After weld
Roll pressing the weld lines for Improve the smoothness.
2’01” in the
·round corner mould
·Each radius a special mould
Product Parameter
| 1300x750x1950mm | |
| voltage | 380V |
| power | 2.3KW |
| The clamping way | Hydraulic pressure, and the pneumatic pressure is tight |
| control method | PLC |
| Hydraulic pressure | 30MPa |
| Compressed air pressure | 0.5—1.0MPa |
| floor space | 1300x750mm |
